Blog Irishmans Lizards

[Irish Lizarman]

View attachment 47431 View attachment 47432 View attachment 47433 View attachment 47431 View attachment 47432 View attachment 47433

now pendrake hope that helps

 

[pendrake]

It does help. Right then:

How do you feel about gluing two small steel (must be ferrous metal) washers underneath the saddle?

What about carefully drilling two corresponding, magnet shaped, cylindrical holes in the back of the beast? Embed magnets** in shallow holes.

Call that ^ idea One.
________________

It looks like there is a tiny amount of clearance under some portions of the saddle. Try ordering some **neodymium magnets that are 1mm thick by 3mm diameter or maybe 4mm. Find out if there is room under there for magnet to magnet connection.

SuperGlue two under the saddle; two to the back of the critter.

Call that ^ idea Two.

 

[Irish Lizarman]

i will try to do the washer trick but i don't understand how to attach them like on the inside of the saddle yeah or flat?

 

[pendrake]

Test by dry fitting. From what I can see in the pix it looks like there’s two spots on each side where a tiny washer might fit.

Flat against the inside of the saddle, one each side is what I would go for. They’d end up angled compared to the table surface.

 

[Irish Lizarman]

Test by dry fitting. From what I can see in the pix it looks like there’s two spots on each side where a tiny washer might fit.

Flat against the inside of the saddle, one each side is what I would go for. They’d end up angled compared to the table surface.

Ive tried a bit the magnets i have arent strong enough so ill have a look tomorrow in town and might see what i can get

 

[Totem Garr]

I think you have done a fantastic job with your Trog and I like the pedistal you created for the skink rider.

 

[Irish Lizarman]

I think you have done a fantastic job with your Trog and I like the pedistal you created for the skunk rider.

Thanks dude

 

[Irish Lizarman]

TA! DA!!! ITS ALIVE! ITS ALIVE!!!

 

[Aginor]

That looks pretty rad!

 

[Irish Lizarman]

That looks pretty rad!

cheers dude im pretty proud

 

[Deed525]

Very good

 

[Deed525]

Ha, very nice indeed

 

[Warden]

Nice work on your conversion!

To say that is your first attempt at converting a model you have achieved a fantastic model, well done he looks great.

Have you got the urge to convert more, it can be quite addictive.

+1

 

[Irish Lizarman]

Ive also been working on a slaves to darkness army too ill see what pictures i can find of them and post them

 

[Irish Lizarman]

found more and will take more pictures in better light tomorrow

 

[Irish Lizarman]

Im really happy with the yellow

 

[Irish Lizarman]

nearly finished lol

 

[Irish Lizarman]

and finally objective markers chaos themed

 

[Aginor]

Good job!

 

[Imrahil]

Really nice, the Yellow pops out nice against all the dark

Gr, Imrahil