1. This is just a notice to inform you that we will move the forum to a new server sometime during the next few weeks. The actual process should not last more than a few hours; during this process, we will disable replying and creating new posts. As soon as we know the date for the transfer, we will update with more information.
    Dismiss Notice

Blog Ryan's Flaming Lizard Shelf

Discussion in 'Personal Paint Logs' started by Ryanj4043, May 23, 2020.

  1. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Got some work done on my back log, magnets ordered and drill bit so im almost ready to go with the magentising the carnosaur.
    20210104_222753.jpg
    Got the 8 cold ones sorted from my second SC box and got the bronze done on both the orcale and saurus as well as the blues on the skink, but i forgot to take that photo. Him and a completed saurus will come soon.

    Additionally on the carnosaur front i finally got the bits filed down so they just pop in and out with friction. Below are some pictures of where i had to file down the back due to a bit of misassembly.
    20210107_182010.jpg 20210107_182016.jpg

    Finally i found some older videos where a guy talks through how he magnetised his carnosaur and it looks like we had the same idea, so ill probably go with how hes done it cause it looks like it worked:
     
    Warden, Imrahil and Lizards of Renown like this.
  2. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Finished the oldblood/scar-vet and oracle. Im noticing a few bits i could touch up but its tabletop ready i guess.
    20210108_225859.jpg 20210108_225936.jpg 20210108_225943.jpg 20210108_230258.jpg
    First time using Blood for the Blood God and i like it. The bronze is also done with balthasar gold, agrax earthshade and retributer armour on the raised bits and ill be doing this going forward. Also blue eye saurus, it was on the pallet and makes it kinda etheral.
    Next up build the saurus guard and the Dino.
     
  3. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    That was an experience and a half that was not made any easier than a slightly misaligned body build but importantly I got a carnosaur magnetised.
    20210115_212337.jpg
    Pretty much most the tools i used beside pliers, superglue and plastic glue. The magnets are just some 3mm x 1mm magnets off amazon (n52 ones i think) and the pinvise is the army painter one with a 3mm drill i found off amazon cause i couldn't find the pack of army painter drill bits.
    20210115_221244.jpg
    First magnet position. Youll need two for the spine, mostly because of the length. Use a bit of sprew to afix magnets where needed. PRO-TIP: the little round nubbins on the sprew are 3ish mm, snip them they use them as a guide for your drill makes life easier when you need easily recessed.
    20210115_224214.jpg
    This is a poor photo but second maget for the spines. Unfortunately i had to pick a tail and drill into that, i also had issues with this manget being flush and this made alot of things worse. Unfortunately this would be a massive job to fix, so ill have to deal with it until it annoys me too much.

    The two above points are what i recommend for the spine magnets. You could put it more in the center of the body but that may require work when the two halfs aren't together.

    20210116_145250.jpg
    This is how i magnetised the head. 2 magnets will hold the head if well aligned, just dont be rough with the model. Each head has a similar post added with magnets and this time the flushness of the magnets doesn't matter as it depends on how you glued it in.

    This took me about 8 hours of work with alot of swearing, hacking plastic and super glue, though this could all be reduced if you take your time and properly build the carnosaur and mark magnet sides correctly. Ill link some videos to the magnets working. If people want a more indepth run through i can do so.



     
    Warden, btrain16 and Imrahil like this.
  4. Imrahil
    Slann

    Imrahil Thirtheenth Spawning

    Messages:
    12,211
    Likes Received:
    25,284
    Trophy Points:
    113
    Well done sir, well done. They fit perfectly!

    Now for the throne and the Skink Oracle. Or will they not be interchangeble?

    Grrr, Imrahil
     
    Ryanj4043 likes this.
  5. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Thanks, I think i will keep the Oldblood to the side and magnetise his base to the main base. If you were to magetise the throne i think you'd need to put the magnets or something magnetic on the inside or drill into the side of the scales and cover them. I might attach the Orcale to trog head or magnetise a him to the main base since its much easier.
     
    Imrahil likes this.
  6. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Its been a bit but i got some the troglosaur done besides the base.
    First the rider:
    20210211_210327.jpg
    20210211_210347.jpg
    Golds are done iwth just retributor armour and riekland fleshshade and maybe a stromhost silver drybrush.
    20210213_221207.jpg
    Mount and rider, lacking base. The rider is magnetised on so he can just be removed and replaced with a skink or rock. The body is lightly dry brished in some places with fyreslayer orange and averland sunset.
    20210213_231659.jpg
    Troglodon and rider. This was my first attempt at wetblending and while it worked, it doesn't really have enough contrast with the rest of the model. I hope it sells the whole flaming lizard thing enough. Next up is basing and the 15 Saurus Guard.
     
  7. Imrahil
    Slann

    Imrahil Thirtheenth Spawning

    Messages:
    12,211
    Likes Received:
    25,284
    Trophy Points:
    113
    Well done on this great creation. The change of parts is hardly noticeable, in fact I had to scroll up to make sure this was the one with the magnetized Carnao/Trog ;)

    Good job!!

    Grrr, Imrahil
     
    Ryanj4043 likes this.
  8. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Thanks, im glad it looks seemless, i need to add more magnets as the head is a bit loose.

    This will be my last magnetised model until i get a stegadon.
     
    LizardWizard and Imrahil like this.
  9. btrain16
    Saurus

    btrain16 Active Member

    Messages:
    63
    Likes Received:
    186
    Trophy Points:
    33
    I think this looks great. I wouldn't worry about the lower contrast. I think it works tremendously well, and looks very naturalistic.
     
    LizardWizard and Ryanj4043 like this.
  10. Warden
    Slann

    Warden Tenth Spawning

    Messages:
    6,510
    Likes Received:
    18,459
    Trophy Points:
    113
    Great to see your work magnetizing that monster, I wasn't brave enough to attempt it myself. Well done!
     
    Imrahil, LizardWizard and Ryanj4043 like this.
  11. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Thanks, i got to say with magnetisation, it's equal parts loving kit bashing and being cheap for me!
     
    Lizards of Renown and Warden like this.
  12. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    So this month i done a infinity campaign so many of my hobby hours were spent on that but i did get some saurus guard paint in between and it took like a month and a half to do so.
    20210328_202103.jpg
    Im happy to be done with these. In many ways they could be touched up and i think i will one day but once these are based these are done.
     
  13. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    I wanted to do a comparison of two models i painted about a year apart so here i go. My Troglodonosaur (black belly) and my scarvet on Carnosaur (pale):
    20210417_182659.jpg
    Front
    20210417_182717.jpg
    Back
    20210417_182801.jpg
    Riders
    20210417_182936.jpg
    Better comparison

    The troglodonosaur one is much better imo, cause i've learned alot of the last 18+ months or so of painting. Both experience and tools help alot cause i actually had more than one good paint brush this time round.
     
    Imrahil and Lizards of Renown like this.
  14. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Knights done. I had a week and a half of semi regular hobbying and made some great progress.
    20210425_103512.jpg
    All 15 of my knights and one scar-vet at the front.
    20210422_215039.jpg
    Side view of a leader.
    20210422_215003.jpg
    Menacing view
    20210424_171115.jpg
    My entire shelf of saurus. 2 Dinos, 15 Guard, 2 Oldbloods, one of which is magnetised, 1 Sunblood, 15 Knights, 14ish Warriors, a Scar-vet on Cold One, and an Astrolith Bearer to cap it all off.

    Of my two SC seraphon box i have just the 12 warrior left to build and paint and ill get to them eventually.

    Bonus: I touched up my mormaer to scan him into TTS
    20210424_184826.jpg 20210424_184834.jpg
     
  15. Imrahil
    Slann

    Imrahil Thirtheenth Spawning

    Messages:
    12,211
    Likes Received:
    25,284
    Trophy Points:
    113
    Good stuff, nice to complete the whole horde of Knights.

    Grrr, Imrahil
     
    Ryanj4043 likes this.
  16. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    An update. I've been working away at the start blood stalkers and Padre Inquistor Mendoza. The three ordinary skinks are finished but bases are done and mendoza is based. I heard that miniac has been doing a 50 hour painting challenge or something with his community that requires them to spend as much time as possibleon a single model to see how you get on, so i picked mendoza to do that with. So far hes only been primed.
    20210502_223740.jpg
    Scale comparison with mendoza and the starblood stalkers
    20210513_223124.jpg
    20210513_223135.jpg
    20210513_223201.jpg
    The skink chief
    20210516_171348.jpg
    All three and the highlighting on the skink bodies doesn't really come across.

    Probably will need to touch up all three
     
    Lizards of Renown likes this.
  17. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Slow month but i've been busy but i got some painting done.
    20210523_154649.jpg
    A better attempt at a red skink. I really like this one better. camera doesn't show it well but i did manage a decent highlight on his abbs 20210528_221221.jpg 20210528_221241.jpg 20210528_221319.jpg 20210528_221328.jpg
    A comparison between my older models and new ones.
    20210601_221622.jpg 20210601_221631.jpg 20210601_221635.jpg
    Old blood now painted. The light is making him look a bit better than he actually is but im hapy woth him. Just the chameleon skink left and im dreading doing him green.
     
  18. Ryanj4043
    Cold One

    Ryanj4043 Well-Known Member

    Messages:
    118
    Likes Received:
    358
    Trophy Points:
    63
    Oh i meant to post this
    20210604_224032.jpg
    So thats the team done. Just need the bases done then ill be happy with them.
    Also Kroak arrived so he'll be coming soon.
     

Share This Page