-
The forum software have been upgraded to the latest version.
If you notice anything that looks off, or does not work, please let us know.
For more information, click here.
Blog Ritual's Army - Lizard on Lizard Action (For the Waaaaagh!)
- Thread starter Ritual
- Start date
Carnasaur
SlanntaClause
Well-Known Member
- Messages
- 1,210
- Likes Received
- 2,779
- Trophy Points
- 113
A scarlet red or something would stand out and have an air of aristocratiness (real word look it up well don't because its not a real word 
) - but yeah a deep red might work really well
) - but yeah a deep red might work really well
Scar-Veteran
Ritual
Well-Known Member
- Messages
- 2,407
- Likes Received
- 7,407
- Trophy Points
- 113
The best thing was it is the easiest thing I have ever done in terms of painting a skin tone... Prime with white then water down reikland fleshshade and apply lightly!
Add a touch heavier for shaded places and profit.
Going to add a few more highlights to it in something, maybe watered down ushabti mixed with a touch of red.
Add a touch heavier for shaded places and profit.
Going to add a few more highlights to it in something, maybe watered down ushabti mixed with a touch of red.
Stegadon
Seraphage
Well-Known Member
- Messages
- 983
- Likes Received
- 1,305
- Trophy Points
- 93
Thanks for sharing the wisdom !
Scar-Veteran
Ritual
Well-Known Member
- Messages
- 2,407
- Likes Received
- 7,407
- Trophy Points
- 113
Copy/pastega from https://ritualminiatures.com/blog/post/fabius-bile-repainted
I finished Fabius Bile last week as an entry for the local GW's painting competition and wanted to cover off how I achieved some of the effects and finishes - mostly for my own records as there's a good chance I'll never remember how I got here otherwise.
Fabius was a 1995 metal model given to me by a friend at work, he had played Warhammer in his early teens and by his own admission hadn't cared much for the painting side of things.
This is how Fabius came to me...
And this is how he ended up...
I won't cover off the process of how I stripped the paint and rebuilt him using Abaddon's sword, I posted pics of the work in progress in a few different places so you've probably seen them already.
Instead I'm going to go over a few elements of the model and how I achieved them.
First up is the leather on his coat, for starters I primed this model all in white. Then I used varying colours of browns in different, thin layers on the different patches.
The colours look mismatched until I washed them all in Agrax Earthshade which really pulled them all together.
I used a dry brush and stippled on darker and lighter shades on each panel to give the leather a textured effect. Finally I did a pretty rough and thin highlight around the edges to add some wearing and add to the dirty feel of it.
The sword was a pretty rough wet blend, washed in both orange and red. I wanted the staff to act as a mirror to the colours of the sword, so added a touch of red to some bronze and used that as the staff colour - again very thin coats so it didn't look too uniform over the white base colour.
The green slime was done by laying multiple light greens and yellows with layers of gloss varnish and a green glaze along the edges to keep it shiny.
The skin was probably my favourite revelation during painting this model - over the white prime I just used Reikland Fleshshade in a thinned down mixture, using a heavier wash in the shadowed areas. I didn't bother doing anything else to it, the skin looked washed out and had enough shadow that I thought it was fine as is.
I wanted the green to mirror above and below, like the red mirrors left to right, so I went for all green goo in the viles on his back piece.
I believe the original had a white "empty space" above the goo - I didn't think that looked right at all, so went with black. I edged the green with a lighter colour and used the same to add some subtle bubbles in the goo. This was all varnished using gloss varnish to make it look like glass.
The metal was reasonably standard, I just used Nuln Oil generously where I would normally opt for something a little more subtle. I think this really added to the grimy feel of the miniature.
Overall I am very happy with how this guy turned out, it was my first attempt at painting anything 40k related and it was very different to what I was used to painting Age of Sigmar bits, the tech was a nice change.
So there we have it, Fabius Bile restored to his rightful glory... As always; feedback is greatly appreciated.
I finished Fabius Bile last week as an entry for the local GW's painting competition and wanted to cover off how I achieved some of the effects and finishes - mostly for my own records as there's a good chance I'll never remember how I got here otherwise.
Fabius was a 1995 metal model given to me by a friend at work, he had played Warhammer in his early teens and by his own admission hadn't cared much for the painting side of things.
This is how Fabius came to me...
And this is how he ended up...
I won't cover off the process of how I stripped the paint and rebuilt him using Abaddon's sword, I posted pics of the work in progress in a few different places so you've probably seen them already.
Instead I'm going to go over a few elements of the model and how I achieved them.
First up is the leather on his coat, for starters I primed this model all in white. Then I used varying colours of browns in different, thin layers on the different patches.
The colours look mismatched until I washed them all in Agrax Earthshade which really pulled them all together.
I used a dry brush and stippled on darker and lighter shades on each panel to give the leather a textured effect. Finally I did a pretty rough and thin highlight around the edges to add some wearing and add to the dirty feel of it.
The sword was a pretty rough wet blend, washed in both orange and red. I wanted the staff to act as a mirror to the colours of the sword, so added a touch of red to some bronze and used that as the staff colour - again very thin coats so it didn't look too uniform over the white base colour.
The green slime was done by laying multiple light greens and yellows with layers of gloss varnish and a green glaze along the edges to keep it shiny.
The skin was probably my favourite revelation during painting this model - over the white prime I just used Reikland Fleshshade in a thinned down mixture, using a heavier wash in the shadowed areas. I didn't bother doing anything else to it, the skin looked washed out and had enough shadow that I thought it was fine as is.
I wanted the green to mirror above and below, like the red mirrors left to right, so I went for all green goo in the viles on his back piece.
I believe the original had a white "empty space" above the goo - I didn't think that looked right at all, so went with black. I edged the green with a lighter colour and used the same to add some subtle bubbles in the goo. This was all varnished using gloss varnish to make it look like glass.
The metal was reasonably standard, I just used Nuln Oil generously where I would normally opt for something a little more subtle. I think this really added to the grimy feel of the miniature.
Overall I am very happy with how this guy turned out, it was my first attempt at painting anything 40k related and it was very different to what I was used to painting Age of Sigmar bits, the tech was a nice change.
So there we have it, Fabius Bile restored to his rightful glory... As always; feedback is greatly appreciated.
Scar-Veteran
Ritual
Well-Known Member
- Messages
- 2,407
- Likes Received
- 7,407
- Trophy Points
- 113
Currently working on combing a demon prince:
With a Bloodthirster:
My plan is to use the wings from the latter and use green stuff to sculpt the back a little more so they fit properly, I'm also working on changing his pose slightly so he's a little more upright...
I'm going to try and find a bigger sword for him too I think.
With a Bloodthirster:
My plan is to use the wings from the latter and use green stuff to sculpt the back a little more so they fit properly, I'm also working on changing his pose slightly so he's a little more upright...
I'm going to try and find a bigger sword for him too I think.
Scar-Veteran
tom ndege
Well-Known Member
- Messages
- 2,568
- Likes Received
- 5,173
- Trophy Points
- 113
Copy/pastega from https://ritualminiatures.com/blog/post/fabius-bile-repainted
I finished Fabius Bile last week as an entry for the local GW's painting competition and wanted to cover off how I achieved some of the effects and finishes - mostly for my own records as there's a good chance I'll never remember how I got here otherwise.
Fabius was a 1995 metal model given to me by a friend at work, he had played Warhammer in his early teens and by his own admission hadn't cared much for the painting side of things.
This is how Fabius came to me...
And this is how he ended up...
I won't cover off the process of how I stripped the paint and rebuilt him using Abaddon's sword, I posted pics of the work in progress in a few different places so you've probably seen them already.
Instead I'm going to go over a few elements of the model and how I achieved them.
First up is the leather on his coat, for starters I primed this model all in white. Then I used varying colours of browns in different, thin layers on the different patches.
The colours look mismatched until I washed them all in Agrax Earthshade which really pulled them all together.
I used a dry brush and stippled on darker and lighter shades on each panel to give the leather a textured effect. Finally I did a pretty rough and thin highlight around the edges to add some wearing and add to the dirty feel of it.
The sword was a pretty rough wet blend, washed in both orange and red. I wanted the staff to act as a mirror to the colours of the sword, so added a touch of red to some bronze and used that as the staff colour - again very thin coats so it didn't look too uniform over the white base colour.
The green slime was done by laying multiple light greens and yellows with layers of gloss varnish and a green glaze along the edges to keep it shiny.
The skin was probably my favourite revelation during painting this model - over the white prime I just used Reikland Fleshshade in a thinned down mixture, using a heavier wash in the shadowed areas. I didn't bother doing anything else to it, the skin looked washed out and had enough shadow that I thought it was fine as is.
I wanted the green to mirror above and below, like the red mirrors left to right, so I went for all green goo in the viles on his back piece.
I believe the original had a white "empty space" above the goo - I didn't think that looked right at all, so went with black. I edged the green with a lighter colour and used the same to add some subtle bubbles in the goo. This was all varnished using gloss varnish to make it look like glass.
The metal was reasonably standard, I just used Nuln Oil generously where I would normally opt for something a little more subtle. I think this really added to the grimy feel of the miniature.
Overall I am very happy with how this guy turned out, it was my first attempt at painting anything 40k related and it was very different to what I was used to painting Age of Sigmar bits, the tech was a nice change.
So there we have it, Fabius Bile restored to his rightful glory... As always; feedback is greatly appreciated.
A realy nice report on a really impressive project... really detailed and informative! Great work on both mini and report!
Have a Spiderman for that!
Or two... you deserve it!
